Floodproofing.com has partnered with ILC Dover® to bring these innovative products to the industry.
Standard Door Flood Barriers
ILC Flex-Cover® Door is a high-strength flood barrier engineered to provide a flood barrier for single or double doors. It provides a watertight and impact resistant barrier by combining a structural frame, water barrier, and impact-resistant layers with advanced compression gaskets. Flex-Cover® Door can be stored near the point-of-use for deployment in minutes.
Flex-Cover® Door functions as a dry flood barrier installed at door and other building openings. Permanently installed wall anchors facilitate rapid deployment prior to a pending weather event. ILC Dover Flex-Cover® Door features:
Structural aluminum frame
Tensioned impact webbing
Fabric water barrier
Long-life compression gaskets
Bottom gasket protection in storage
Wall anchor kits
Flex-Cover® Door is compact, designed to be stored near the point-of-use for fast deployment in the case of a pending weather event. Using pre-installed anchors mounted into the structure, deployment can be performed by one or two people in minutes.
Flex-Cover® Door advanced compression gaskets provide a watertight seal on the ground and wall interfaces using a unique compression system. The bottom gasket is automatically protected when the Flex-Cover® Door is removed from position for storage, ensuring watertight sealing for the next weather event.
UP TO 6 FT. DFE
Flex-Cover® Door seals against most standard building façades, including concrete, brick, and CMU, with some preparation. Wall anchor kits are available, and a location template is supplied to ensure proper positioning of the permanently installed wall anchors. It meets International Building Code requirements and ASCE 24-14, ASCE 7-16, ANSI-2510, and ASCE 7-10. Product configurations fit:
• 2 Widths available; openings up to 48” (single door) and openings up to 86” (double doors)
• 2 ft. and 4 ft. heights (available in both widths). Panels can be stacked for a total of 6 ft. DFE